I get a TS error when trying to print on a wireless network.
1. Print the WLAN Report
If the wireless connection failed, the report will show the relevant error code to help resolve the issue.
> Click here to see how to print the WLAN Report.
2. Check the Wireless Status and Error Codes on the WLAN Report
Check the "Connection" column listed at the top of the WLAN report.
Connection: OK
Your Brother machine is already connected to a wireless network.
If you still cannot print wirelessly despite the "Connection : OK" status:
- Turn your Brother machine and wireless router off. Wait a few minutes, and then turn them on again.
- The Network Key (Password) you entered may be incorrect. Enter the Network Key again.
- Use the Network Connection Repair Tool, which can automatically locate and update your Brother machine's IP address within your printer driver. (Windows-only)
The instructions of Network Connection Repair Tool are available on the download page.
> Click here to download the Network Connection Repair Tool in the Downloads section.
- Your computer may not be connected to the Network Name (SSID) configured in your Brother machine.
Connection: Failed (Error: TS-XX)
Your Brother machine is not connected to a wireless network.
Learn more about your connection error by clicking the error code below:
- TS-01
- TS-02
- TS-03
- TS-04
- TS-05
- TS-06
- TS-07
- TS-08
3. TS Error Codes and Solutions
TS-01
| Problem | Solution |
| The wireless setting is not activated. | Change the wireless setting to ON. If a network cable is connected to your machine, disconnect it and change the wireless setting of your machine to ON. |
TS-02
| Problem | Solution |
| The wireless access point/router cannot be detected. |
|
TS-03
| Problem | Solution |
| The wireless network and security setting you entered may be incorrect. | Reconfirm the wireless network settings. If you do not know this information, ask your network administrator. |
TS-04
| Problem | Solution |
| The Authentication/Encryption methods used by the selected wireless access point/router are not supported by your machine. | Change the authentication and encryption methods of the wireless access point/router. The available authentication methods varies depending on your Brother machine. See the manual for your machine. If your issue is not solved, the SSID ornetwork settings you entered may be incorrect. Confirm the wireless network settings. |
TS-05
| Problem | Solution |
| The security information (SSID/Network Key) is incorrect. | Confirm the SSID and Network Key. |
TS-06
| Problem | Solution |
| The wireless security information (Authentication method/Encryption method/Network Key)is incorrect. | Confirm the wireless security information (Authentication method/Encryption method/Network Key). |
TS-07
| Problem | Solution |
| The machine cannot detect a WLAN access point/router that has WPS enabled. | If you want to connect with WPS, you must operate both your machine and the WLAN access point/router. Confirm the connection method for WPS on WLAN access point/router and try starting again. |
TS-08
| Problem | Solution |
| Two or more WLAN access points that have WPS enabled are detected. |
|
How to confirm wireless security information (SSID/authentication method/encryption method/Network Key) of your WLAN access point/router:
- The Default security settings may be provided on a label attached to the WLAN access point/router. Or the manufacturer's name or model number of the WLAN access point/router may be used as the default security settings.
- See the documentation provided with your WLAN access point/router for information on how to find the security settings.
- If the WLAN access point/router is set to not broadcast the SSID, the SSID will not automatically be detected. You will have to manually enter the SSID name.
- The Network key may also be described as the Password, Security Key or Encryption Key.
If you do not know the SSID and wireless security settings of your WLAN access point/router or how to change the configuration, see the documentation provided with your WLAN access point/router, ask the manufacturer of your access point/router or ask your Internet provider or network administrator.
Find the Network Name (SSID, ESSID) and Network Key
You must find out the wireless network settings of your wireless router or access point. Check and write down the current wireless network settings below:
- Network Name (also known as "SSID" or "ESSID")
- Network Key (also known as "Password", "Security Key", or "Encryption Key")
How to find the Network Name (SSID) and Network Key (Password)
- Check the base or side of your wireless router or access point.
- See the documentation provided with your wireless router or access point.
- Brother cannot provide this information. If you cannot find your wireless Network Name and Network Key, contact your Internet service provider or router manufacturer.
- If your wireless router or access point uses WEP encryption with multiple WEP keys, write down and use only the first WEP key.
Staat het antwoord op uw vraag er niet bij, kijkt u dan eerst bij de andere vragen:
- Ga naar de eerste pagina van het gedeelte Veelgestelde vragen en probleemoplossing
- Bekijk andere vragen in deze categorie
Heeft u de beschikbare handleidingen bekeken?
- Ga naar het gedeelte Handleidingen
Heeft u meer hulp nodig, dan kunt u contact opnemen met de Brother-klantenservice.
- Ga naar Contact
Verwante modellen
DCP-1610W, DCP-1612W, DCP-340CW, DCP-375CW, DCP-585CW, DCP-6690CW, DCP-7055W, DCP-7070DW, DCP-750CW, DCP-770CW, DCP-9015CDW, DCP-9020CDW, DCP-J1100DW, DCP-J132W, DCP-J140W, DCP-J152W, DCP-J172W, DCP-J315W, DCP-J4110DW, DCP-J4120DW, DCP-J515W, DCP-J525W, DCP-J552DW, DCP-J562DW, DCP-J572DW, DCP-J715W, DCP-J725DW, DCP-J752DW, DCP-J772DW, DCP-J774DW, DCP-J785DW, DCP-J925DW, DCP-L2520DW, DCP-L2530DW, DCP-L2560DW, DCP-L3510CDW, DCP-L3550CDW, DCP-L6600DW, DCP-L8410CDW, DCP-L8450CDW, HL-1210W, HL-1212W, HL-2135W, HL-2170W, HL-2270DW, HL-3070CW, HL-3140CW, HL-3150CDW, HL-3170CDW, HL-4070CDW, HL-4570CDW, HL-4570CDWT, HL-5280DW, HL-5370DW, HL-5470DW, HL-6180DW, HL-6180DWT, HL-J6000DW, HL-J6100DW, HL-L2340DW, HL-L2350DW, HL-L2365DW, HL-L2375DW, HL-L3210CW, HL-L3230CDW, HL-L3270CDW, HL-L5200DW(T), HL-L6300DW(T), HL-L6400DW(T), HL-L6450DW , HL-L8260CDW, HL-L8350CDW, HL-L8360CDW, HL-L9200CDWT, HL-L9300CDW(TT), HL-L9310CDW(T), HL-S7000DN, MFC-1910W, MFC-255CW, MFC-490CW, MFC-5895CW, MFC-6490CW, MFC-6890CDW, MFC-7840W, MFC-7860DW, MFC-790CW, MFC-820CW, MFC-845CW, MFC-885CW, MFC-8870DW, MFC-8890DW, MFC-8950DW, MFC-8950DWT, MFC-9320CW, MFC-9330CDW, MFC-9340CDW, MFC-9840CDW, MFC-990CW, MFC-9970CDW, MFC-J1300DW, MFC-J265W, MFC-J415W, MFC-J430W, MFC-J4410DW, MFC-J4420DW, MFC-J4510DW, MFC-J4610DW, MFC-J4620DW, MFC-J470DW, MFC-J4710DW, MFC-J480DW, MFC-J491DW, MFC-J497DW, MFC-J5320DW, MFC-J5330DW, MFC-J5620DW, MFC-J5720DW, MFC-J5730DW, MFC-J5910DW, MFC-J5920DW, MFC-J5930DW, MFC-J5945DW, MFC-J615W, MFC-J625DW, MFC-J6510DW, MFC-J6520DW, MFC-J6530DW, MFC-J6710DW, MFC-J6720DW, MFC-J6910DW, MFC-J6920DW, MFC-J6925DW, MFC-J6930DW, MFC-J6935DW, MFC-J6945DW, MFC-J6947DW, MFC-J825DW, MFC-J870DW, MFC-J880DW, MFC-J890DW, MFC-J985DW, MFC-L2700DW, MFC-L2710DW, MFC-L2720DW, MFC-L2730DW, MFC-L2740DW, MFC-L2750DW, MFC-L3710CW, MFC-L3750CDW, MFC-L3770CDW, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW, MFC-L8650CDW, MFC-L8690CDW, MFC-L8850CDW, MFC-L8900CDW, MFC-L9550CDW(T), MFC-L9570CDW(T), MFC-L9577CDW
FAQs
What is TS 07 printer error? ›
TS-07. The machine cannot detect a WLAN access point/router that has WPS enabled. If you want to connect with WPS, you must operate both your machine and the WLAN access point/router. Confirm the connection method for WPS on WLAN access point/router and try starting again.
How do I fix the TS o2 error on my Brother printer? ›TS-02. The wireless access point/router cannot be detected. Check the following points: Unplug the power to your wireless access point/router, wait for 10 seconds, and then plug it back in.
What is error code TS 04? ›TS-04. The Authentication/Encryption methods used by the selected wireless access point/router are not supported by your machine. Change the authentication and encryption methods of the wireless access point/router.
What is error code TS 05? ›TS-05. The security information (SSID/Network Key) is incorrect. Confirm the SSID and Network Key.
What is a TS printer? ›TSPrint provides you with a simple remote desktop printing software, as well as additional tools that make operations with Windows terminal services easier. Selectively enable or disable features, so that you have complete control over your terminal server.
How do I get rid of print error? ›- Unplug and restart your printer. ...
- Check cables or wireless connection. ...
- Uninstall and reinstall your printer. ...
- Install the latest driver for your printer. ...
- Clear and reset the print spooler. ...
- Change a printer's status to "online" ...
- Unplug and restart your printer.
- ➜ Method 1: Check your cables / network.
- ➜ Method 2: Make sure your printer has ink and paper.
- ➜ Method 3: Restart your printer.
- ➜ Method 4: Update printer drivers.
- ➜ Method 5: Use the Windows troubleshooting tool.
- ➜ Method 6: Reset your print spooler.
The problem arises when the VPN uses an IP address that has been blacklisted which can happen if the IP address has previously been used to send spam.
What is Brother error TS 05? ›The error code TS-05 means that your Brother printer is not connected to your home wireless network. The main is your SSID and Network Key is incorrect, due to WLAN access point/router cannot be detected.
How do I fix error code 04? ›No matter if you receive Warzone error code 4 on Xbox One or on Windows 10/11, restarting your console is the easiest fix for you. Taking this measure will close unnecessary background processes and help to refresh pertinent servers.
What does an error occurred while saving the printer list error code 5? ›
Error Code 5 is a Windows error code that appears when the user does not have sufficient permission to access the requested file or location. It appears when the software was denied access to a location for the purposes of saving, copying, opening, or loading files.
What is this error code 5? ›What Is Error Code 5 Chrome? Chrome Error Code 5 occurs when there's an issue with the SSL protocol – specifically, when the server is unable to recognize a secure connection from your browser. The most common cause of this problem is that the server isn't configured properly for Secure Sockets Layer (SSL) connections.
What is error code E 06? ›Errorcode E06 occurs because of a Fault with the heating circuit.
What is TS easy print? ›TS Easy Print is basically a printer proxy that redirects printing-related jobs to the. user's local machine using the printer drivers installed on the client computer.
What is Pixma TS series? ›Canon PIXMA TS Series Wireless All-in-One Color Inkjet Printer, White - Print, Scan, Copy - 4800 x 1200 dpi, Borderless Printing.
What is a SFP printer? ›Single-Function Peripheral (SFP) - Fancy term for a device that just prints. Multi-Function Peripheral (MFP) - Fancy term for a device that prints, scans to network destinations, and copies. MFPs tend to have more horsepower and larger displays than SFPs.
Why do I keep getting an error when trying to print? ›If your printer's status displays "Printer in error state," there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn't open and the paper isn't jammed.
Why is my wireless printer not printing? ›If your wireless printer isn't printing, be sure to check your settings. Make sure your Wi-Fi is enabled, and then check to be sure you're connected to the correct Wi-Fi network. You can often check your connectivity by printing a network configuration sheet by selecting this option from the printer's display menu.
Why is my network printer not printing? ›Restart the printer.
Often, a network printer problem may be traced to a lost IP address. This could be due to a power glitch causing the printer to lose its network settings. Restarting the printer may restore this.
Your computer can be connected to the 5 GHz band network and be able to print or scan (depending on your machine's specifications), to the Brother machine connected to the 2.4 GHz band.
Is there a hard reset for Brother printer? ›
Use the Factory Reset function to restore all settings back to the factory settings. Unplug all the interface cables before you perform a Factory Reset. Press the Up or Down arrow key to select Initial Setup, and then press OK. Press the Up or Down arrow key to select Reset, and then press OK.
What does network reset on Brother printer do? ›All network settings, such as password and IP address, will be restored to the factory default settings.
Why is the WiFi light blinking on my Brother printer? ›When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access point.
What is the common error in Brother printer? ›Brother printer error
The Drum Error is another common error experienced by users of Brother printers. Both the error message “Drum Error” and “Clean Drum Unit” mean that the drum unit of your machine is dirty. The dirt may be caused by dust or by loose toner.
The error code 0x0000002C, 0x00000000 typically occurs in systems where multiple AC feeds are powered on sequentially rather than simultaneously. An Onboard Administrator firmware update should remedy this problem.
How do I fix error code 2005 0003? ›- Reseat the microSD card. Power off the console, then remove and reinsert the microSD card.
- Try a different microSD card. ...
- Format the microSD card. ...
- Remove the microSD card, and then try to download the software onto the system memory.
Insufficient physical RAM memory can give rise to Sims 3 error code 12. Since the paging file works as a secondary RAM, you can fix the issue by increasing the paging file size.
What is Brother error TS 08? ›TS-08. Two or more WLAN access points that have WPS enabled are detected. Confirm that only one WLAN access point/router within range has the WPS method active and try again. Try again after a few minutes to avoid interference from other access points.
What is the response code for put error? ›For a PUT request: HTTP 200, HTTP 204 should imply "resource updated successfully". HTTP 201 if the PUT request created a new resource. For a DELETE request: HTTP 200 or HTTP 204 should imply "resource deleted successfully".
What is bad response error code? ›The HyperText Transfer Protocol (HTTP) 400 Bad Request response status code indicates that the server cannot or will not process the request due to something that is perceived to be a client error (for example, malformed request syntax, invalid request message framing, or deceptive request routing).
What is the purpose of error codes? ›
In computing, an error code (or a return code) is a numeric or alphanumeric code that indicates the nature of an error and, when possible, why it occurred.
How do I stop error code 5? ›Fix 5: Change User Account Control Settings
The User Account Control (UAC) may block you adding new program/software. Therefore, you should turn it off in order to avoid system error 5. Type UserAccountControlSettings into Windows search box. Select UserAccountControlSettings from the result or just hit Enter.
An E5 error occurs when the printer experiences a scanning error. Turn the printer off and on again to resolve a scanning error. If you were not scanning when the error occurred, skip to the Service the printer section at the end of this document.
What is error 5 on HP printer? ›Look for jammed paper or debris inside the printer, and then use both hands to remove any that you find. Use both hands to remove any jammed paper or objects from the input bin. Align the cartridge with the tracks inside the printer, push in until firmly seated, and then close the toner access door.
How to bypass system error 5 Access Denied? ›- * Press Windows Key + R, type netplwiz.
- * Click on Properties, then select the Group Membership tab.
- * Select the Administrator, Click apply/ok.
Error 5 indicates that you do not have the required permissions to access a file.
What is error code 4? ›Error code 4 shows the Error message “you have been disconnected from Call of Duty, Modern Warfare servers.” and asks you to visit the Activision support page. This error is most commonly encountered while connecting to the Warzone servers.
What is error code E 07? ›If your Bosch dishwasher is greeting you with an E07 error code it is likely to be a problem with the dryer fan. The fan is intended to circulate warm air, (on some models) after the rinse cycle to help dry your dining ware.
What is error code 22.06 01 06? ›The error code 22.06. 01:06 is triggered when a leakage is found in the bottom tray, this leakage is detected by a sensor located at the bottom left corner of the tray, and when this sensor is wet it triggers the SE 22.06. 01:06.
What is error code F6 E2? ›The F6 E2 alert indicates there is issue with the appliance control unit, user interface or associated wiring. Unplug the washer, wait five minutes, then plug back in.
What is error 07 on HP printer? ›
An Er/07 error message indicates the toner cartridge or imaging drum is missing or not installed correctly. To resolve the issue, correctly install the missing toner cartridge or imaging drum.
Why is my Canon printer printing error? ›Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you're trying to print. The loading bay for your paper might have become lodged with paper or you're using the wrong type of paper.
What is error #740 connecting to network printer? ›What causes the “error #740 adding printer” on Windows 10/11? As the error message hints, the error 740 printer is often related to the network administrator privileges. In addition, a temporary glitch, outdated or corrupt printer drivers, and improper printer settings can trigger the 740 error as well.
What is the error code for printer not activated? ›You may see a "Printer not activated, Error code-30" type error if an update or other program interfered with or broke the previously installed PDF driver used by the software. On occasion even a major Windows update has been known to break existing printer and other types of drivers.
How do I fix error 0x00000077? ›This seems to be a driver issue, uninstall the printer driver from root level and reinstall the driver to fix the issue. Perform root level uninstallation to remove all the printer related software's. In Windows, search for and open Programs and Features. Select your HP printer.
How do I bypass HP printer error? ›To override HP ink cartridge error, remove and reinstall the indicated cartridge 2-3 times until it firmly seats in the slot. Then turn off the printer and remove all cartridges. Gently, with a dry lint-free cloth, wipe the contacts on the cartridge and carriage to remove any dirt or residue.
How do I get my HP printer out of error mode? ›- Ensure the Printer Is Properly Connected to Your PC. The first thing to verify is your printer's connection with your PC. ...
- Reboot the Printer. ...
- Verify the Paper and Cartridge Ink Levels. ...
- Reinstall the Printer Drivers. ...
- Automate the Print Spooler Service. ...
- Update Windows 10.
- Step 1: Press and hold the “Stop” button on your Canon printer until you hear the alarm ringing.
- Step 2: Release the “Start” button only after the alarm flashes or rings at least 19 times.
- Step 3: This should have restored your device to its original factory setup.
If your printer's status displays "Printer in error state," there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn't open and the paper isn't jammed.
How do I bypass the error code on my Canon printer? ›- Press 'Setup'.
- Go to 'Device settings' and press 'OK'.
- Go to 'Reset' and press 'OK'.
- Go to 'Reset everything' and press 'OK'.
- Select 'Yes'.
- Press 'OK'. Your printer has been reset.
What is printer error code 0x00000040? ›
The error code 0x00000040 could appear if your printer driver is out-of-date or faulty. Your printer driver may need to be updated in this situation to help with problem resolution.
How do I clear corrupt networked printer drivers? ›- Go to Print Management: ...
- In print management select All Printers under Custom Filters. ...
- Then go to All Drivers under Custom Filters. ...
- Open Windows Explorer or My Computer and navigate to C:\Windows\System32\spool\drivers. ...
- Go into each folder one at a time and delete everything in there. ...
- Restart the computer.
- In the printer driver properties window of the application, select the printer driver of the machine and click the [Preferences] button.
- Click the [Job Handling] tab.
- Enter user information. ...
- Enter the user name and job name as necessary. ...
- Click the [OK] button to start printing.
You may see a “printer offline” error if your computer can't communicate with your printer. This can be caused by loose cable connections or an outdated printer driver or operating system.